In the course of driving, there will always be such and such a situation, light cause certain economic losses, but also affect the safety of life, then how to avoid such a sudden situation? Often check regularly, so that timely detection, timely processing.

For example, traffic on the way to find the truck clutch are not isolated, that you do not know whether the card encountered, we work together to analyze, to see which factors and how to deal with the truck clutch separation solution.

First, check the clutch oil shell brake oil, to see whether the amount of oil is too small, if the amount of oil is too small, of course, can not be used. If the oil surface is normal, then more on the car, step on a few feet clutch, to see whether the gear stalls have improved, if improved, the clutch circuit with the air, at this time the exhaust air, try again.

Two, check the clutch master pump, clutch pump, check whether there is oil spills around, if there is oil leakage, you need to replace the oil pump or general pump treatment.

Three, clutch master pump or pump if the seal is not strict, if not tight, a single change repair kit generally can not guarantee the quality, probably over a period of time will appear above the fault, in this case, proposed to replace the assembly process.

Find out the reason, know how to deal with, but the actual operation may still have doubt, below we will explain in detail how to discharge the air in the clutch circuit.

Exhaust air need two people to complete, you can find the same car personnel to help, one of them fiercely clutch, step on a certain number of times after stepping on, and the other one in the following row of air, row after locking the air screws. Then repeat the procedure of stepping and discharging until the clutch is felt higher and the air screw is not put out. The air screw is locked. At the same time check the clutch pump and the total pump share, push rod free clearance, generally two to three mm or so, feel a little gap can be.

Wipe clean grease, the car on the clutch gear, see the clutch is separated from normal, hanging files smooth, no teeth phenomenon, there are no other faults, such as clutch separation normal, troubleshooting. Of course, if you need to replace the assembly, then you have to deal with a professional repair factory.